
Suspended Solids Transmitter
SS312-01-N01-3
Suspended Solids Transmitter
Product Highlights
• Optical scattering measurement without reagents.
• Modulated light reduces visible-light interference.
• Automatic temperature compensation.
• Configurable device address and baud rate.
• IP68 probe; low power consumption of 0.2 W.
• Modulated light reduces visible-light interference.
• Automatic temperature compensation.
• Configurable device address and baud rate.
• IP68 probe; low power consumption of 0.2 W.
Product Overview
The SpeSense SS312-01-N01 Suspended Solids Transmitter is designed for continuous monitoring of suspended solids in wastewater and industrial water systems. Using optical absorption measurement, it supports reagent-free monitoring of suspended matter, with automatic temperature compensation and self-cleaning functionality on the applicable configuration. RS485 communication enables integration with PLCs, industrial controllers and compatible water quality monitoring networks. The transmitter is suitable for wastewater treatment, sludge monitoring, industrial effluent management and environmental water quality assessment.
| Item | Specification |
| Model | SS312-01-N01-3 |
| Measurement principle | Optical scattering |
| Range options | 0–5000 / 0–1000 / 0–200 mg/L; select one |
| Measurement error | ±5% FS; depends on sludge homogeneity |
| Resolution | 0.1 mg/L |
| Response time | ≤30 s |
| Supply voltage | DC 10–30 V |
| Power consumption | 0.2 W |
| Communication interface | RS485; Modbus RTU; 4800 bit/s default |
| Probe operating temperature | 0–40 °C |
| Ingress protection | IP68 |
| Probe pressure limit | <0.6 MPa |
| Probe cable | 5 m standard; customizable |
| Housing material | Corrosion-resistant plastic |
| Maintenance / calibration interval | 3 months recommended |
| Probe dimensions / thread | 137 mm dimension shown; Ø30 mm; NPT 3/4 |









