SS312-01-ETH-2
Suspended Solids Transmitter

SS312-01-ETH-2

Suspended Solids Transmitter

Product Highlights

• Integrated self-cleaning system reduces biofouling.
• Modulated light reduces visible-light interference.
• Automatic temperature compensation.
• 2 s acquisition; configurable upload interval.
• RJ45 interface; static IP, DHCP and DNS support.
Download PDF

Product Overview

The SpeSense SS312-01-ETH Suspended Solids Transmitter is designed for continuous monitoring of suspended solids in industrial and municipal wastewater systems. Its optical absorption measurement principle supports reagent-free monitoring, while automatic temperature compensation and the applicable self-cleaning function help maintain measurement stability. Ethernet connectivity enables integration into wired industrial networks, supervisory control systems and centralized water quality monitoring platforms. The transmitter is suitable for wastewater treatment plants, industrial process water monitoring, sludge management and online environmental monitoring.
ItemSpecification
ModelSS312-01-ETH-2
Measurement principleOptical absorption
Range options0–20000 / 0–5000 / 0–1000 / 0–200 mg/L; select one
Measurement error±5% FS; depends on sludge homogeneity
Resolution0.1 mg/L
Response time≤30 s
Supply voltageDC 12–30 V
Power consumption1.4 W normal; 4.7 W during self-cleaning
Data uploadEthernet; RJ45; TCP upload; static IP or DHCP; gateway and DNS support
Probe operating temperature0–40 °C
Housing environment−40 to +60 °C; 0–95% RH, non-condensing
Ingress protectionProbe: IP68; transmitter housing: IP65
Flow velocity<3 m/s
Probe pressure limit<0.1 MPa
Data acquisition interval2 s
Data upload interval30 s default; 1–60000 s in specification table; configuration section states 1–65535 s
Probe cable5 m standard; customizable
Housing materialCorrosion-resistant plastic and stainless steel
Maintenance / calibration interval3 months recommended
Self-cleaning system service life18 months; dynamic seal replacement required after continuous use
Housing dimensions117 × 87 × 43 mm maximum
Probe dimensions / thread247 mm dimension shown; 227 mm body dimension; Ø50 mm; NPT 3/4
SpeSenseSpeSense

SpeSense Technologies Inc. is a high-tech enterprise specializing in the R&D and manufacturing of photoelectric instruments and sensors.

Contact Information

© 2026 SpeSense Technologies Inc. All rights reserved.