
Suspended Solids Transmitter
SS312-01-ETH-2
Suspended Solids Transmitter
Product Highlights
• Integrated self-cleaning system reduces biofouling.
• Modulated light reduces visible-light interference.
• Automatic temperature compensation.
• 2 s acquisition; configurable upload interval.
• RJ45 interface; static IP, DHCP and DNS support.
• Modulated light reduces visible-light interference.
• Automatic temperature compensation.
• 2 s acquisition; configurable upload interval.
• RJ45 interface; static IP, DHCP and DNS support.
Product Overview
The SpeSense SS312-01-ETH Suspended Solids Transmitter is designed for continuous monitoring of suspended solids in industrial and municipal wastewater systems. Its optical absorption measurement principle supports reagent-free monitoring, while automatic temperature compensation and the applicable self-cleaning function help maintain measurement stability. Ethernet connectivity enables integration into wired industrial networks, supervisory control systems and centralized water quality monitoring platforms. The transmitter is suitable for wastewater treatment plants, industrial process water monitoring, sludge management and online environmental monitoring.
| Item | Specification |
| Model | SS312-01-ETH-2 |
| Measurement principle | Optical absorption |
| Range options | 0–20000 / 0–5000 / 0–1000 / 0–200 mg/L; select one |
| Measurement error | ±5% FS; depends on sludge homogeneity |
| Resolution | 0.1 mg/L |
| Response time | ≤30 s |
| Supply voltage | DC 12–30 V |
| Power consumption | 1.4 W normal; 4.7 W during self-cleaning |
| Data upload | Ethernet; RJ45; TCP upload; static IP or DHCP; gateway and DNS support |
| Probe operating temperature | 0–40 °C |
| Housing environment | −40 to +60 °C; 0–95% RH, non-condensing |
| Ingress protection | Probe: IP68; transmitter housing: IP65 |
| Flow velocity | <3 m/s |
| Probe pressure limit | <0.1 MPa |
| Data acquisition interval | 2 s |
| Data upload interval | 30 s default; 1–60000 s in specification table; configuration section states 1–65535 s |
| Probe cable | 5 m standard; customizable |
| Housing material | Corrosion-resistant plastic and stainless steel |
| Maintenance / calibration interval | 3 months recommended |
| Self-cleaning system service life | 18 months; dynamic seal replacement required after continuous use |
| Housing dimensions | 117 × 87 × 43 mm maximum |
| Probe dimensions / thread | 247 mm dimension shown; 227 mm body dimension; Ø50 mm; NPT 3/4 |









