
Cup&Vane Wind Sensor
SS101-05
Dust-Resistant Wind Speed Sensor
Product Highlights
• Non-contact magnetic sensing measurement principle.
• Built-in high-performance sensor for accurate and reliable data collection.
• All-metal housing with corrosion resistance and strong wind resistance.
• Aluminum alloy wind cups for operation in harsh environments.
• Sealed internal and rotating components help prevent ingress of water, salt mist, dust and sand.
• Fault-tolerant circuit protection, CE EMC and multi-level lightning/surge protection are stated on the source page.
• Built-in high-performance sensor for accurate and reliable data collection.
• All-metal housing with corrosion resistance and strong wind resistance.
• Aluminum alloy wind cups for operation in harsh environments.
• Sealed internal and rotating components help prevent ingress of water, salt mist, dust and sand.
• Fault-tolerant circuit protection, CE EMC and multi-level lightning/surge protection are stated on the source page.
Product Overview
The SpeSense SS101-05 Dust-Resistant Wind Speed Sensor is designed for wind speed monitoring in outdoor environments where airborne dust and particulate exposure are important operating considerations. It is suitable for meteorological stations, industrial facilities, construction sites, agricultural monitoring systems and environmental data acquisition networks. Its dust-resistant design helps address installation requirements in demanding environments where reliable wind measurement is needed.
| Item | Specification |
| Measuring range | 0-30 m/s; 0-50 m/s |
| Operating voltage | 15-30 VDC |
| Start-up wind speed | >=0.5 m/s |
| Accuracy | +/-0.5 m/s (<5 m/s); +/-3%FS (>=5 m/s) |
| Output signal | 4-20 mA; 0-5 VDC; 0-10 VDC; RS485 (Modbus) |
| Operating temperature | -20 C to +85 C |
| Operating humidity | 0%-95% RH, non-condensing |
| Wind resistance | >70 m/s for 30 min |
| IP rating | IP65 |
| Body material | Aluminum alloy / polyester coating |
| Wind cup material | Aluminum alloy |
| Measurement principle | Non-contact magnetic sensing |
| Burst immunity | Standard: Level 3 (2 kV, 100 kHz), Class B; lightning-resistant: Level 4 (4000 V, 100 kHz), Class B |
| Surge immunity | Standard: Level 1 (common mode 500 V, differential mode 250 V), Class B; lightning-resistant: Level 4 (common mode 4000 V, differential mode 2000 V), Class B |









