SF 300Z
FTIR Analyzer

SF 300Z

高性价比傅里叶

产品亮点

● Wide Spectral Coverage
● High Resolution & Precision
● S/N Ratio up to 30,000:1
● Sealed Moisture-Protected Optics
● Flexible ATR & Transmission Sampling
● Intelligent FTIR Software
● Extensive Spectral Libraries
● Compact, Low-Power Design
下载PDF

产品概述

The SpeSense SF300Z is a cost-effective FTIR spectrometer designed for routine infrared analysis, material identification and laboratory spectroscopy. Covering a broad spectral range of 7800–350 cm⁻¹ with spectral resolution better than 1.0 cm⁻¹, the system combines a sealed moisture-protected optical design, high-sensitivity DLATGS detection and flexible ATR or transmission sampling. It is well suited for polymer identification, chemical analysis, pharmaceutical testing, raw-material inspection, quality control and academic research, providing reliable FTIR performance for both routine laboratories and general research applications.
ItemSpecification
Spectral range7800–350 cm⁻¹ (approx. 1.28–28.57 µm)
Spectral resolutionBetter than 1.0 cm⁻¹
Wavenumber precision≤ 0.01 cm⁻¹
Signal-to-noise ratioBetter than 15,000:1 standard; better than 30,000:1 optional (peak-to-peak, 4 cm⁻¹, 1-minute acquisition)
InterferometerMichelson interferometer, 30° incidence; continuous dynamic alignment
Beam splitterGermanium-coated KBr substrate with moisture protection
DetectorHigh-sensitivity DLATGS detector with moisture barrier
Infrared sourceHigh-energy, high-efficiency, long-life ceramic source
Reference laserHigh-performance VCSEL laser
A/D conversion24-bit, 500 kHz
Data interfaceUSB 2.0; compatible with USB 3.0 host ports
Data acquisitionReal-time spectral acquisition and instrument status monitoring
Sample chamberLarge compartment with sliding door; supports multiple accessory types
Power consumptionLess than 30 W during normal operation
Input power100–240 VAC, 50/60 Hz
Dimensions (W × D × H)450 × 350 × 210 mm
Weight14 kg
Software platformWindows PC; supported operating-system versions depend on software release
Operating temperature15–30 °C
Operating relative humidity15%–65% RH
Storage temperature−20 to 55 °C
LaboratoryDry, well ventilated and protected from direct sunlight; air conditioning and dehumidification recommended
ElectricalStable, grounded supply; at least four grounded sockets recommended for a complete workstation
SpeSenseSpeSense

思谱传感科技有限公司(SpeSense Technologies Inc.)是一家专业从事光电仪器和传感器研发、生产的高新技术企业。

联系方式

© 2026 思谱传感科技有限公司 版权所有。