SS312-01-N01-3
Suspended Solids Transmitter

SS312-01-N01-3

悬浮物变送器

产品亮点

• Optical scattering measurement without reagents.
• Modulated light reduces visible-light interference.
• Automatic temperature compensation.
• Configurable device address and baud rate.
• IP68 probe; low power consumption of 0.2 W.
下载PDF

产品概述

The SpeSense SS312-01-N01 Suspended Solids Transmitter is designed for continuous monitoring of suspended solids in wastewater and industrial water systems. Using optical absorption measurement, it supports reagent-free monitoring of suspended matter, with automatic temperature compensation and self-cleaning functionality on the applicable configuration. RS485 communication enables integration with PLCs, industrial controllers and compatible water quality monitoring networks. The transmitter is suitable for wastewater treatment, sludge monitoring, industrial effluent management and environmental water quality assessment.
ItemSpecification
ModelSS312-01-N01-3
Measurement principleOptical scattering
Range options0–5000 / 0–1000 / 0–200 mg/L; select one
Measurement error±5% FS; depends on sludge homogeneity
Resolution0.1 mg/L
Response time≤30 s
Supply voltageDC 10–30 V
Power consumption0.2 W
Communication interfaceRS485; Modbus RTU; 4800 bit/s default
Probe operating temperature0–40 °C
Ingress protectionIP68
Probe pressure limit<0.6 MPa
Probe cable5 m standard; customizable
Housing materialCorrosion-resistant plastic
Maintenance / calibration interval3 months recommended
Probe dimensions / thread137 mm dimension shown; Ø30 mm; NPT 3/4
SpeSenseSpeSense

思谱传感科技有限公司(SpeSense Technologies Inc.)是一家专业从事光电仪器和传感器研发、生产的高新技术企业。

联系方式

© 2026 思谱传感科技有限公司 版权所有。