
COD sensor
SS306-01-ETH
自清洗 COD 变送器
产品亮点
● Reagent-free dual-wavelength UV absorption.
● Integrated self-cleaning against biofouling.
● Automatic turbidity and temperature compensation.
● Wide 9–30 VDC supply and configurable Ethernet upload interval.
● Integrated self-cleaning against biofouling.
● Automatic turbidity and temperature compensation.
● Wide 9–30 VDC supply and configurable Ethernet upload interval.
产品概述
The SpeSense SS306-01-ETH Self-Cleaning COD Transmitter is designed for continuous COD monitoring in industrial and municipal wastewater treatment systems. Its dual-wavelength ultraviolet absorption method supports reagent-free measurement, with turbidity and temperature compensation to improve the consistency of online monitoring. The self-cleaning design helps reduce sensor surface fouling, while Ethernet communication supports integration into wired industrial networks and centralized monitoring platforms. Applications include industrial effluent monitoring, wastewater process control and automated water quality data acquisition.
| Item | Specification |
| Power Supply | DC 9–30 V |
| Typical Power Consumption | ≤1 W normal; ≤1.7 W during self-cleaning |
| Communication / Upload | ETH via RJ45; TCP data upload |
| Network Interface | Static IP or DHCP; gateway and DNS supported |
| Measurement Principle | Dual-wavelength ultraviolet absorption |
| COD Measurement Range | 0–500 mg/L equiv. KHP |
| Turbidity Measurement Range | 0–200 NTU |
| COD Measurement Accuracy | ±5% FS equiv. KHP at 25 °C |
| Turbidity Accuracy | ±5% FS at 25 °C |
| COD Resolution | 0.1 mg/L |
| Turbidity Resolution | 0.1 NTU |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.5 °C |
| Repeatability | ±1% FS equiv. KHP at 25 °C |
| Response Time | ≤20 s |
| Operating Conditions | Probe: 0–40 °C; enclosure: −40–60 °C, 0–95% RH non-condensing |
| Ingress Protection | Probe IP68; enclosure IP65 |
| Flow Velocity | <3 m/s |
| Probe Pressure Resistance | <0.1 MPa |
| Data Upload Interval | Default 30 s; 1–60000 s configurable |
| Data Acquisition Interval | 2 s |
| Cable Length | 5 m by default; custom length available |
| Housing Material | Corrosion-resistant plastic and stainless steel |
| Recommended Calibration / Maintenance | Every 3 months |
| Self-cleaning System Life | About 18 months; depends on cleaning frequency |









