
Soil Sensor
SS204-01
管式土壤墒情传感器
产品亮点
● 3–5 measurement layers with optional EC and tilt channels.
● Dielectric sensing through a PVC tube;electrodes do not contact soil.
● Source material indicates no influence from salts, fertilizer,pesticides or irrigation.
● RS485 Modbus-RTU and network upload options support field integration.
● Dielectric sensing through a PVC tube;electrodes do not contact soil.
● Source material indicates no influence from salts, fertilizer,pesticides or irrigation.
● RS485 Modbus-RTU and network upload options support field integration.
产品概述
The SpeSense SS204-01 Multi-Depth Soil Sensor is designed for soil condition monitoring at different depths in agricultural and environmental applications. Multi-depth soil measurements can help characterize variations in subsurface conditions and support irrigation planning, crop management and soil research. The sensor is suitable for smart agriculture, greenhouse monitoring, field experiments and environmental monitoring systems that require soil data from multiple measurement depths.
| Item | Specification |
| Operating temperature | −40°C to +80°C |
| Soil moisture range | 0–100% |
| Soil temperature range | −15°C to +35°C |
| Soil electrical conductivity (EC) range | 0–20,000 μS/cm or 0–10,000 μS/cm, depending on multi-layer EC configuration |
| Tilt range | −90° to +90° |
| Soil moisture accuracy | ±5% (@50%, 25°C) |
| Soil temperature accuracy | ±0.5°C (25°C) |
| EC accuracy | ±3% FS within 0–10,000 μS/cm; ±5% FS within 10,000–20,000 μS/cm (brown soil, 60%, 25°C) |
| Tilt accuracy (typical) | X/Y: static ±0.1°, dynamic ±0.5°; Z: static ±0.5°, dynamic integral error exists |
| Tilt temperature drift | ±(0.5°–1°), −40°C to +60°C |
| Measurement point spacing | 10 cm |
| Power supply | 10–30 V DC wide-range supply (RS485 versions); battery, external supply or solar supply (network versions) |
| Battery operation duration | Up to one week of outdoor operation (network versions; configuration dependent) |
| Housing material | PVC tube |
| Protection rating | IP68 for the below-ground section |
| Output signal | RS485 (Modbus protocol); GPRS/GSM cellular network; 4G cellular network |
| Power consumption | 3-layer RS485: 0.7 W / 0.75 W with multi-layer EC; 3-layer network: 0.15 W / 0.2 W with multi-layer EC; 5-layer RS485: 0.96 W / 1.0 W with multi-layer EC; 5-layer network: 0.18 W / 0.25 W with multi-layer EC |
| Response time (RS485) | ≤60 s |
| Cloud platform (network versions) | Default upload to the general monitoring cloud platform |
| Upload interval (network versions) | External power supply: 1 min; battery supply: 5 min |









